Ask Experts Questions for FREE Help !
Ask
    knarf69's Avatar
    knarf69 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 15, 2013, 09:39 AM
    Problem with intertherm furnace
    Intertherm furnace goes on then blower cycles off and on

Check out some similar questions!

Problem with Intertherm Furnace, blower stays on all the time [ 1 Answers ]

I have a intertherm furnace and the blower motor stay on even if I shut it off at the stat, the only way I can shut the motor off is at the breaker. I think the fan limit on the furnace is bad, can some one enlighten me

Intertherm furnace codes? This furnace flashes the yellow light 6 times [ 0 Answers ]

Furnace will run for 30 seconds. It shuts down and the yellow light will flash 6 times and the does the same thing over and over. Red light stays steady. Thanks for the help.

Intertherm furnace e2eb-017hb runs briefly, shuts off, then furnace just clicks [ 3 Answers ]

I have an Intertherm furnace, e2eb-017hb. It comes on briefly, blows warm air, then shuts off, and a clicking sound comes from the coil contacts area. I have tested the t-stat, and also replaced a coil contact, thinking that was the problem. I would appreciate any help on what to do next.

My intertherm furnace pilot lights but furnace won't kick on [ 5 Answers ]

I need some diagnostic help. We have a full propane tank. A new burner plate (last year) and the blower works. We light the pilot but the knob should pop up after one minute thus lighting the furnace. It won't pop up. What part should we replace? The furnace is a 17 year old Intertherm MGH...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.