 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Pressure switch on A/C unit? Overheat? Fan motor stops running after 10-20 minutes...
I'm new at this.. but have some electrical background and am experiencing similar issues as another post (https://www.askmehelpdesk.com/heatin...l)....I've got a brand new fan motor, relay, two capacitors (fan, and condenser) and my fan keeps stopping after 10-25 minutes. Where is the pressure switch? What does it look like? (Carrier system) Is it something I can replace? I have a spare thermostat is it likely to be bad... worked fine all winter..
|
||||
Check out some similar questions!
I have 3 flashes when the furnace shuts off inducer is still running.When it shuts down wait a few min and the furn. Comes back on again.Is this normal operation?I do have a drain opposite side of the inducer.Is that on the wrong side of the furnace.Concord 95.
We have a Gibson central air and heat pump. Blower quits and unit outside freezes up. If we turn it off for a while everything works okay for a little while. Is the relay switch in the blower motor bad? If so where is it located?
I have a craftsman 42 inch mower with a 17hp b&s mower... 7/8 yrs old... cranks and runs fine for about 30/45 minutes... sounds like starveing for gas and cuts off... will crank back up and run for a minute or so and does the same thing again... new fuel line and filter... new coil... same...
Today I washed off my outside A/C unit since I had recently bought the house and the p/o's weed eated and such constantly around it but never washed the thing off.. It had a lot of dirt and grim in the fins so I decided it would best if I took the fan and grill's off and washed the grills and fins...
My Kenmore Series 60 Dryer will stop running after 10 minutes.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
