Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Bryant plus 90
[ 0 Answers ]
Code 31 . The ignitor is taken out for replacement. The inducer moder does not start in the beginning. It starts after the 90 second blower motor runtime. What might have gone bad?
Bryant
[ 1 Answers ]
I have a bryant plus 80 series g furnace. Model 395CAV048111. My furnace will start a cycle but goes off. Then the led will flash 5 times, pause and then repeat the 5 flashes. Also, if I unplug the furnace it will reset and complete a cycyle, then it will start going off again. Any help would...
Bryant 310aav0360
[ 2 Answers ]
I think my communication bord is out in my furnace.(Bryant 310AAV0360) How much do they run? My heat would come on for no more than a minute and then it would shut off.
Bryant code 33
[ 1 Answers ]
Bryant gas funace model 310aav042090aaja. Code 33. Wired around limit and it worked fine. Replaced with new limit throws code again. Vents clear. Filter clear. What next? Is it really getting too hot? Runs about 4 minutes before throwing code and cycles down about 3 minutes.
Bryant Burner
[ 3 Answers ]
I have a valve on a Bryant Burner for an old gas furnace. There seems to be a problem with the gas valve that feeds the burner. Are 40 year old valves available? Thank you. Dennis View more questions Search
|