 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Pipe pressure testing procedure
Sir,
Will you send a format for submitting report on the flushing and chilled water pressure test being done for one of our client at Mirdiff.We have already done the chemical flushing and need to just submit the report in a format for consultants approval. Do the needful to |
||||
|
|
|
||||
|
Sorry we do not provide that service.
|
||||
|
|
Not your question?
Ask your question
View similar questions
| Question Tools | Search this Question |
Check out some similar questions!
Amount of nitrogen for testing pipe
[ 7 Answers ]
What is the volumn of nitrogen required per one foot of 16" pipe to pipe test at 180#of pressure
Pressure testing a new gas pipe
[ 1 Answers ]
Hi- We just plumbed a new gas pipe and are about to pressure test it. My son tested it at 25 psi for 2 hours but read another place it was to 15psi for 5 minutes- what are the correct standards Thanks, Lynne
Pressure Tank Replacement procedure
[ 2 Answers ]
The pressure tank on my well needs to be replaced, it is leaking from the bottom edge. I have called the well service in the area and they want $1100 to replace the tank. My system is an older tank with two fittings was told by the well company the newer tanks have only one fitting and this will...
View more questions Search
|
