Ask Experts Questions for FREE Help !
Ask
    camaro999's Avatar
    camaro999 Posts: 2, Reputation: 1
    New Member
     
    #1

    Sep 29, 2010, 03:35 PM
    The pilot light stays light until I turn the thermostat up.
    I have a miller furnace Model mgc-80. The inducer motor comes on & blows out the pilot light. The gas valve doesn't open. What could be wrong?

Check out some similar questions!

Pilot light stays on maybe 1/2 to 1- hr then goes out [ 1 Answers ]

The pilot light on the water heater goes out after the hot water temp is reached

Pilot light for coleman7900 is on but when I turn on the thermostat nothing happens [ 2 Answers ]

The pilot light is on , I turn up or on the thermostat and nothing happens,no air blows, there is no clicking sound when I turn on the thermostat.

Pilot light stays lit, but the gas valve will not open [ 1 Answers ]

I have an old Thatcher furnace model 53170. The pilot light stays lit, but the gas valve will not open to ignite the burners. I have a constant 24v across the transformer terminals. When I check the terminals at the gas valve I experience an intermitant 24v signal about every 5 minutes. I can't...

Pilot light stays on but pilot switch keeps resetting [ 5 Answers ]

I have a baso L62AA-5 pilot switch and it used to keep resetting. I would hold the switch down for a good minute and the gas lights, but after a half an hour or so it would go back to its reset position. The standing pilot light was always on and never a problem. After a few days of manually...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.