 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Pilot goes out when trying to turn on..
I have a wall heater and have had a recent problem. Up until now it worked fine, then after. A few months of no use this happened: when I try to activate the heater by turning up the thermostat, the heater makes a clunk or pop sound, then I check and see that the pilot light has gone off. Burners never turned on either. I've bypassed the wires in the heater to try and turn it on as well without the use of the thermostat and that always happens. The noise, then after quickly looking at the pilot, it gradually dies. I've relit it and tried a dozen times. Does anyone have any ideas about what the issue might be?
|
||||
Check out some similar questions!
Why does my gas wall heater pilot light go out when I turn the valve from 'pilot' to 'on'? The pilot lights and stays lit until I try to turn the valve. It's got a brand new thermocouple.
I turned on the heat for the first time this season and no heat came out. I checked the furnace and the pilot was out. I lit the pilot and it stays lit (been on for over a day now.) I tried the heat again and still nothing. So, the furnace is getting power, the fan works when "ON." The pilot...
My furance has a knob that won't turn either way nor will push in... What is the trick?
I have an older furnace that I am trying to squeeze one more winter out before replacing. I came home tonight and the house was cold. Went down to the furnace and pulled the cover off and noticed the pilot was lit but the furnace had not fired on. If I blow on the pilot, the coupling sparks and...
Hi, Hope someone can help with this problem I've been having with my heater. I have a Day & Night heater and whenever I turn the heater off, the pilot light goes off and I have to manually light the pilot each time. Any clues on what could be the problem? Thanks for any help!
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
