 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Payne furnace trouble code led continuously blinking
Started to cool off and finally had to turn on the heat. Our Payne system is only blowing out cold air. The trouble code LED is blinking continuously. The label on the side of the unit says that continuous blinking means "Line voltage polarity reversed". I haven't touched anything since the last time it was working. Just to make sure, I checked the polarity and everything seems to be OK... Any suggestions?
|
||||
Check out some similar questions!
The error code is flashing and I know certain lengths, long and short indicate a code but how do I tell which one it is?
This furnace is about 14 yrs old I think and does not have an air conditioning unit; only heat. Started having issues with furnace not working some months ago. Has let us trip it on all this time by pushing all the reset buttons inside. Which reset button that makes it come back on has not had...
Have a 3ton Payne Gas frunace... the Ignitor glows and the Gas Valve opens,the burners turn on,but after about a minute,the flame goes out and the Induced Draft motor shuts off.Only the blower stays running... the red led light keeps flashing... what is wrong? I replaced the ignitor,but the problem...
My Trane XE90 LED is blinking continuously. What does this mean?
I have a Goodman Model # GSM100-4 furnace that has been a pain the tail. This week I went to start it up and I am getting a constant flash on the control board. I have an old, what I thought, was a good board that I swapped out. Still the same problem, constant flashing. I tried swapping the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
