I have a Trane 900 with heat pump. The outside unit still runs even when I turn thermostat off. I have to shut it off from the breaker. I put in a new Honeywell thermostat and it still does the same thing. What's wrong?
Add your answer here.
Check out some similar questions!
Why does AC compressor fan run on when the furnace runs [ 2 Answers ]
Since replcing the termostat, my AC compressor fan runs when the furnace runs. This never happened before I replaced the thermostat. What did I do wrong with the thermostat replacement?
Compressor and fan run long after fan inside has gone off [ 1 Answers ]
The compressor and fan outside on my heat pump continue to run long after the fan inside has turned off. I have cleaned the relay contacts thinking that they were sticking but it is still running. Could it be the digital thermostat inside?
I have a Goodman heater model #PGB030050-1 I turned on the thermostat to run (90)an [ 2 Answers ]
I have a Goodman heater model #PGB030050-1 I turned on the thermostat to run (90)and the heater made a snapping noise as if the igniter was trying to spark (did not see a spark). The burners are not red or flamed. The igniter did not fire up the burner. When I feel that the unit is trying to purge...
New Compressor Run OK. HVAC Fan only run in Heat mode. [ 15 Answers ]
This board is awesome. I have done some reading first on here. Here's my case: Compr runs fine. Fan on HVAC blower inside runs only in Heat mode. Not on Cool. Not even on "FAN-ON" as opposed to FAN-AUTO. Can this be an issue with relay and board within HVAC? Per other thread, it was talking...
Compressor off/ fan trying to run [ 2 Answers ]
The fan on my Rudd unit keeps clicking like trying to start. I replaced the contactor. It didn't correct the problem. I called a service tech. He checked it out and said everything was fine. He replaced a flag connector. I had wired the new (double contactor) in for single pole. He moved the line...
View more questions Search