Ask Experts Questions for FREE Help !
Ask
    levonpg's Avatar
    levonpg Posts: 3, Reputation: 1
    New Member
     
    #1

    Jan 27, 2015, 11:55 AM
    Outside AC working while heating
    My outside AC unit fan works when the heating turn on. Pretty sure it is not a heat pump. Is it installed incorrectly?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #2

    Jan 27, 2015, 12:25 PM
    "Pretty sure it is not a heat pump". So what do you have?
    levonpg's Avatar
    levonpg Posts: 3, Reputation: 1
    New Member
     
    #3

    Jan 27, 2015, 12:37 PM
    I think it is a standard AC unit - Carrier 38EZG030 unit
    bitters's Avatar
    bitters Posts: 348, Reputation: 12
    Full Member
     
    #4

    Jan 27, 2015, 02:34 PM
    It's not a heat pump. Does the compressor come on too?
    levonpg's Avatar
    levonpg Posts: 3, Reputation: 1
    New Member
     
    #5

    Jan 27, 2015, 02:37 PM
    Do not know. How could I check it? Is not it wrong that the fan comes on during heating if it is not a heat pump?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #6

    Jan 27, 2015, 04:07 PM
    If you Google your model#, it says it is an "air conditioner / heat pump". So yes, it should be running when calling for heat.
    bitters's Avatar
    bitters Posts: 348, Reputation: 12
    Full Member
     
    #7

    Jan 28, 2015, 09:04 AM
    Quote Originally Posted by levonpg View Post
    Do not know. How could I check it? Is not it wrong that the fan comes on during heating if it is not a heat pump?
    From what I have found it's just an AC unit. So no it shouldn't be running. Should be able to hear the compressor running. To make sure it's not a heat pump look inside the unit. If it has a reversing valve then it's a heat pump.
    Attached Images
     
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
     
    #8

    Jan 28, 2015, 01:54 PM
    That unit is straight cooling. For the time being & until the weather is a bit more comfortable to work outdoors, simply turn off the power to the outdoor unit. You can do so either at the breaker panel or by pulling the disconnect which should be on the wall next to the unit.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heating not working [ 0 Answers ]

After draining heating to install new radiators my boiler is only heating for a few minutes then boiling water goes through the vent into the f&e tank. All rads have been bled along with all airing points on system including pump which is also working. I took the fitting off before the pump and...

Heating not working [ 0 Answers ]

Carrier 12000 BTU split aircon: works fine on cooling but on heating the indoor fan does not come on.

How do I get my central heating working again? [ 0 Answers ]

It is a Glowworm Betacom 30C, about 15 months old. The Pressure warning led is flashing and the pressure gauge reads about 0.3bar. Last night I bled some air from a radiator and assume that is the cause, although it was never a problem with the old system.

One of my heating zones is not working [ 6 Answers ]

I have baseboard forced hot water system with 3 zones. The problem is that the 3rd zone (upstairs) only kicks in when the 1 zone (basement) is working. I changed the thermostat in the 3rd zone but to no avail. I only have heat in the 3rd zone when the 1st zone is working.


View more questions Search