I am trying to install Ritetemp 6022 and replacing old thermostat. I have Y,O,G,W, C and R wires used in the old thermostat. All wires except R are on the 6022. Do I connect the R wire to RH or RC or another. Second what is the jumper configuration that I need

This faucet does not operate in the same manner of any I have previously used, is there an operation manual that explains how it works?

So the guide plus demo screen keeps coming up and we can't shut the guide off. We have tried everything in the user manual but it doesn't work. We are not hooked to cable or satellite so I switched it to either vhs or uhf. Does it need repair, is there a way to get rid of the guide plus system

I have a heat pump am attempting to hook up ritetemp 6022 thermostat the instructions are to hook g to g r to rh y to y w to o blue is not mentioned and these are the wires I have However when in the heating mode all workd good for heat but if I switch to cool it also works but when it...