 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Open limit switch needs reset?
Unit is not blowing hot air. The red light indicater is indicating the limit switch is open. Is there a way to reset or test the switch or will it need replacing?The unit is a Auto ignition Furnaces G8C/FG8 series. Installed almost 8 yrs ago.
Your prompt attention will greatly be appreciated. I in Texas and its getting cold! *** explain the function of the limit switch so I may better understand. Thank you, Single in Texas |
||||
Check out some similar questions!
I have a furnace with the B18099-13 control board. The fan blows constantly whenever power is applied. The status LED on the control board indicates "OPEN LIMIT SWITCH" Where are the two limit switches located? On board or off? Are there any tricks, quick-fixes, or "band-aids" for this...
I have a Rheem furnace Criterion II that will not blow air. I can hear the gas flame kick in but the blower never starts. The LED on the control board blinks 3 times then off for 2 seconds which is suppose to indicate limit switch open. Should I rely on this and replace the limit switch? Is their a...
Where can I find this on my furnace
Furnace - Amana GUIA115A40 Control board - White-Rodgers 50A50-298 My furnace just has the fans running non-stop and the control board is flashing an open limit switch error code. The furnace is getting good circulation and both fans seems to run fine. I cut power to it all night, in the...
My electricity went off during the night and I woke up as it came back on. The light on the furnace flashes four times which says it means 'limit switch open'. I need help.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
