Ask Experts Questions for FREE Help !
Ask
    becker's Avatar
    becker Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 14, 2009, 08:27 AM
    Open limit switch code on goodman furnace
    I have a goodman furnace with an open limit switch code /blinking lite. Blower runs,but no flame what can I do to fix this problem?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jan 14, 2009, 08:37 AM
    Try to see if the limit switch has a reset push button in the center of the back of the switch. If not you will have to replace the switch if defective. The switch tripped for a reason. There is a wiring diagram on the back side of the blower door to assist you with finding the switch.

    Make sure of these.

    Air filter new or clean

    All registers open

    Cold air returns not blocked

    If the problem persists you may have to call for professional On Site service.

    I will not be able to post back right away since I am leaving but I will check your post later in the day.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Open limit switch on Concord Gas Furnace [ 14 Answers ]

I have a Concord 80 Plus Gas Furnace. I am starting the furnace for the winter and it gives me a LED code of open limit switch or limit switch circuit. Everything seems to work fine up until the point where the blower needs to turn on. I had the same problem last year but got a tech to fix it. I am...

Goodman limit switch/pressure switch? [ 2 Answers ]

Hi, I've got a goodman furnace (mod. # GHT070-3) it's about 5 years old. Recently, the heat will only kick on for about 30 seconds then shut off. It's giving me 4 flashes: Open limit switch, then it kicks off. After that it gives me 3 flashes and turns back on (pressure switch). It seems the...

Brayant 80t furnace, 'Limit or flame rollout switch is open"? [ 1 Answers ]

HI, I am new here and am having a furnace problem. As a new homeowner I would like to take a look at this myself before just grabbing the phone books. I have a Bryant 80t furnace. Built in 2000 and has been serviced every other year. Unit is clean and in good shape. Woke up to a cold house and...

Furnace is blinking 4 times saying open limit switch [ 1 Answers ]

My furnace is blinking 4 times indicating that the furnace has an open limit switch. I changed the switch and it is still blinking 4 times indicating the same thing. What else could be wrong or what can I do to fix this problem? ITS COLD!!

View more questions Search