Ask Experts Questions for FREE Help !
Ask
    darwin420a's Avatar
    darwin420a Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 30, 2013, 08:12 AM
    Older two wire 7day pprogramable noma stat
    Reads
    Lo Hi on display. No action in stat no matter what I do. What's up with stat?

Check out some similar questions!

How to wire 4wire electric furnace to 5 wire heat pump and honeywell rth7600 th stat [ 0 Answers ]

How do I wire a four wire electric furnace to a five wire heat pump with a RTH7600 series Honeywell thermostat?

2-wire hook-up from a Carrier stat to a 3M30 Filtrete stat? [ 0 Answers ]

Ok what I have is a Carrier {edge}. Removing it to install a Filtrete 3M30. I have two wires coming from the wall. One white & one red. The back plate to the Carrier has a 4-wire hook-up. From the wall wires red go's to V White go's to Vg Then there are two wires coming from the back of the...

Zone valves 3 wire and a 3 wire stat [ 0 Answers ]

I need the second zone valve hooked up the 1st floor is up and running need to get power from the first to the 2nd need a drawn out diagram have 6 termanals on all three zone valves

Just 3 wire T-Stat connection, new stat, diff letters [ 6 Answers ]

Hi all, I've done tons of reading and can't find my specific wiring, tstat combo to figure it out... hopefully someone can shed some light on it for me. Natural gas forced air furnace, no air conditioning. Had a honeywell for the last 9 years, easy install, labelled easy. (but its dead) Wire...

Noma programmable T/stat [ 2 Answers ]

Replaced a lever type t/stat (heating & A/C) which had 5 wires connected. Orange wire > yellow terminal on T/stat White wire > terminal Green wire >terminal Red wire >terminal Black > terminal. The new Noma has 4 terminals only Yellow, White, Green & Red. Connected and matched Colours using...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.