|
|
|
|
New Member
|
|
Jan 29, 2010, 08:49 PM
|
|
Older rheem furnace efficiency ratingl
What is the efficiency rating for a Rheem furnace Model RGDA-125A-GR, Serial CN30102 F1388 8119, Category I. It was installed new in 1987. Input 125000 BTU and it did not give an output number.
|
|
|
Ultra Member
|
|
Jan 29, 2010, 09:04 PM
|
|
Does it have metal or plastic exhast?
|
|
|
Ultra Member
|
|
Jan 29, 2010, 09:08 PM
|
|
Furnace have came along way in ratings from 1987 to now why do you ask. It will not qualify for the stimulas rebate credit.
|
|
|
Heating & Air Conditioning Expert
|
|
Jan 29, 2010, 09:27 PM
|
|
Between 65 to 73 % depending on spark ignition or not or automatic flue damper or not. This is for a old style metal flue type discharge model. Now a smart service person armed with the proper tools and extra orifices can usually add and extra point or 2 depending upon there lever of expertise. These furnaces were always sized to big so you shrink them down to the size for the structure and gain a little bit of efficiency.
The nice part about these older units is they do not break near as often as the new stuff. You save gas with the newer style units but spend it back on parts and labor to keep it running plus you will not see the newer units lasting 25 or 30 years like the old stuff. Just the facts.
|
|
|
Ultra Member
|
|
Jan 29, 2010, 09:39 PM
|
|
I have to agree with Hvac1000. They don't make them like they used to. They made them to last back then.
|
|
|
New Member
|
|
Jan 29, 2010, 09:47 PM
|
|
Originally Posted by Zapmaker
What is the efficiency rating for a Rheem furnace Model RGDA-125A-GR, Serial CN30102 F1388 8119, Catagory I. It was installed new in 1987. Input 125000 BTU and it did not give an output number.
It has a metal flue and a continuous pilot. I want to know the output so I can size my new furnace.
|
|
|
Ultra Member
|
|
Jan 29, 2010, 10:20 PM
|
|
Let your installer figure it out,, he should do a manuel J,to figure what you need,, not compare to what you have
|
|
|
Heating & Air Conditioning Expert
|
|
Jan 29, 2010, 11:11 PM
|
|
Never use the old equipment to size your new equipment. This is a big mistake and will cost you big energy dollars. To be accurate have a manual J done on your home. You will be glad you did and if the person you are dealing with does not know what a manual J is tell them to take a hike because they are totally non professional.
Get more than one estimate and read the link below and believe what it says to save you a bunch of problems.
|
|
|
New Member
|
|
Oct 30, 2013, 04:32 PM
|
|
What's the BTU rating on a rheem furnace model 90rs10eq501
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
Concord 90% Efficiency Furnace Troubleshooting
[ 2 Answers ]
The furnaces vent blower comes on then no ignition of gas ,so it turns back off.? Does anyone know the Led Trouble shooting codes for this counterflow furnace? Model #45738-001.
Rheem A/C - Older Unit
[ 2 Answers ]
How do I find out how old the A/C unit is by the model/serial # and what Seer it is? The unit # is RACB-042JAS. Buying a house and need to determine if A/C is still any good.
Thanks
Amana hi efficiency furnace
[ 1 Answers ]
I have Amana hi efficiency furnace. For some reason when furnace is working it works only for about five minutes and than it shows the code that the furnace is overheated. So it runs for 5 minutes and than cool down for 10. Imagine what it takes to heat the house.
Changing the filters on a...
Furnace efficiency
[ 1 Answers ]
I have a Concord hi efficiency furnace (125 BTU). It is piped with 3-inch supply and 3-inch exhaust rather than the 2-1/2 inch as recommended in the installation manual. Will this affect the efficiency?
Hooking up an older 2 wire T87F to Rheem air handler
[ 3 Answers ]
Hi,
Some Background: I have a Rheem heat pump air handler that used to be in my house and now I'm trying to install it in my shop. I removed the A/C coils and disconnected one of the heat strips. All that is left is a blower and 9.6kw heating strip. I was going to use the Rheem thermostat but I...
View more questions
Search
|