 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Nordyne troubleshooting codes
I have a nordyne heat pump , mod. # FG6RC 080N-16B, that does not always start when the thermostat is turned on. The led light blinks 4 times. I checked and cleaned the ground. No change. If I turn the power breaker off for a few seconds and then turn it back on, the furnace starts.
|
||||
Check out some similar questions!
What does an led flashing 4 times mean
I have a Nordyne G5RC080C-16 gas furnace which had the blower fail. It was in A/C mode with the condenser still running but no blowerat the furnace/evap. A tech repakced the blow motor and capacitor -- still no blowe, even in direct 'fan' mode. There is a code (one flash) suggesting limit switch...
I have a Intertherm Nordyne Model#MMBB-056ABHR-06 gas fired furnace with "NO HEAT". It was manufactured 12/96. The electronic control board is blinking 3 times. Also the pre-blower seems to work right and the board clicks I believe properly. What could be the problem?
Can someone give me the codes for all the Nordyne LED blinks? My furnace was blining 4 times, I replaced the igniter and now it is blinking 2 times... All the codes would be greatly appreciated - thanks, in advance. :cool:
Nordyne model #g4ra072c-12 code lightblinks continiously and the blower motor will not shut off.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
