Can I check to see if it's fuses or unit by turning off the unit and retrying the breakers?. It made a "sound" when I tried to reset them with unit on and didn't want to try again without some information... Thanx in advance...

I live in a mobile home that has a Intertherm electric furnace by Nordyne. It is a single motor 240 volt 60 hz 1/6 hp. The BTUH is 53,000. 65.5 total amps, min cir amps 82, max over current protection 90. Model # FEH-015HA-04 My furnace had problems last year. The thermostat wouldn't work....

I have a Nordyne G6RC frunance that is not igniting. The Supply fan will not turn on when the thermostat is on the "heat" and "auto" fan position. But the furnace will try to fire. I can get the fan to come on when placed in the "on" position with but the furnace will stop trying fire. Am I looking...

I have a nordyne model KG6RC 100C-20B furnace. Woke up this morning and the blower is not coming on. The red light on the circuit board is blinking twice in a row every few seconds. I found the code which reads-2 blinks. Pressure switch is open with inducer fan on. What is the best way to repair?

To mygirlsdad, Guess what? Remember the Nordyne furnace? Well it worked for a week and now it's blowing thr circuit board fuse (3 amp). We, 2 different hvac guys and me have it narrowed down to this. When we unhook the green ground wire that comes from the circuit board that goes to the furnace...