Ask Experts Questions for FREE Help !
Ask
    jangel59's Avatar
    jangel59 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 28, 2007, 11:06 AM
    New Gas Goodman furnace won't start!
    I have this problem with a brand new gas furnace, it was installed a few days ago. The heater won't work and the ac blower shuts off immediately when in ac mode. I believe the wiring is OK. The gas won't click and nothing happens when you try to start the heater from the thermostat. I bridged W & R and the blower will come on for a minute or two and then shuts off. My guess is that the circuit board is bad, or maybe the gas valve. How do I make sure? I tried rewiring it, but it throws the breaker. Today I am making sure the unit has a good ground, I doubt that is the problem though. What are other things I should check? Your help is appreciated.

    Joe :confused:
    juggallojed's Avatar
    juggallojed Posts: 165, Reputation: 10
    Junior Member
    		  
    #2

    Nov 28, 2007, 05:30 PM
    Quote Originally Posted by jangel59
    I have this problem with a brand new gas furnace, it was installed a few days ago. The heater won't work and the ac blower shuts off immediately when in ac mode. I believe the wiring is ok. The gas won't click and nothing happens when you try to start the heater from the thermostat. I bridged W & R and the blower will come on for a minute or two and then shuts off. My guess is that the circuit board is bad, or maybe the gas valve. How do I make sure? I tried rewiring it, but it throws the breaker. Today I am making sure the unit has a good ground, I doubt that is the problem though. What are other things I should check? Your help is appreciated.

    Joe :confused:

    Time to call the professionals
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman Furnace [ 2 Answers ]

I've purchased a home where the furnace was to be replaced NEW with a Goodman Furnace. We've been given the model # GMPE 100 S4A from the seller. Anyone know if this is an actual Goodman Model - the colour is beige, not black.

Goodman furnace GMNT080-4 furnace runs good for a while then has to be manually reset [ 5 Answers ]

I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...

Goodman furnace will not start [ 3 Answers ]

Newer goodman furnace will not start on call for heat... well 1 out of 15 times it will. The little fan turns on , the HSI glows , gas valve clicks after HSI goes out. This is LP. Can Anyone help?

Goodman Furnace - brand new - won't start [ 7 Answers ]

Installed this summer, A/C works fine. First time I started the furnace (last week) it started fine, then shut off shortly (15 min. later). No led errors are reading on the board. After shutting off power to re-start the start sequence (it shuts down after 3 tries), the inducer motor starts,...

Goodman Furnace will not start [ 4 Answers ]

I have a new Goodman 80% natuaral gas furnace, GMH80451ANA. After installed, it fired right up and ran for about 30 minutes and burned off the smell from the exchanger tubes. Ran it a second time for another half hour or so, then it would not fire up again. The only thing I did was to change...

View more questions Search