Ask Experts Questions for FREE Help !
Ask
    Clyde Driskell's Avatar
    Clyde Driskell Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 31, 2008, 08:33 AM
    Model gmp blower mtr and induction mtr run all the time
    When I close the door switch the blower and induction motor run all the time. The led flashes 4 times. Have checked limits, no open circuit found. The diaphram switch opens and closes at the proper times. Have tightened the neutrel all the way to the breaker pannel. What am I missing?
    Thanks, Clyde
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Aug 31, 2008, 02:20 PM
    Quote Originally Posted by Clyde Driskell
    When I close the door switch the blower and induction motor run all the time. The led flashes 4 times. Have checked limits, no open circuit found. The diaphram switch opens and closes at the proper times. Have tightened the neutrel all the way to the breaker pannel. What am I missing?
    Thanks, Clyde
    Here is the goodman list. Check the mail limit. Locate limit on wiring diagram on the inside of the blower door.
    Attached Images
  1. File Type: pdf GOODMAN%20BLINKS.pdf (19.5 KB, 146 views)

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman model#31A-3BDE799 Snow Blower 5.5hp [ 8 Answers ]

The snowblower is two years old and when the bar to engage the auger is held down the auger will not rotate. Any ideas?

Blower Bryant model [ 1 Answers ]

I have a Bryant furnace/air conditioning unit. The blower does not work. When the blower in turned on manual, the blower motor makes a humming noise but, the blower does not rotate. Can you assist in resolving the problem? Thanks

Blower stay on all the time. [ 1 Answers ]

My intertherm electric furnace blower will not kick off. I have replace the thermostat but I still habe the same problem. The only way I can get the blower to turn off is by shutting the breaker off.

Whirlpool washer model # LSR8244EQ1 won't spin most of the time [ 1 Answers ]

My whirlpool washer won't spin in spin cycle most of the time. However it will agitate and rinse But most of the time it won't spin (in the spin cycle). I can hear the motor running and sometime it will start to spin at a slow pace. (I did this with any clothes in the washer). How can I test the...

Set Blower motor start time? [ 1 Answers ]

Manufacturer = Inter City Furnace Manufacture Date = 1991 Type = Forced air - up draft (house is on a slab) Fuel = Nat Gas The furnace cycles on and off correctly BUT it seems that the blower motor takes a long time to turn on - the flame is burning for maybe a minute(?) before the blower...


View more questions Search