Ask Experts Questions for FREE Help !
Ask
    nemorris's Avatar
    nemorris Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 15, 2015, 08:15 AM
    Model 1F82-2G2 Flame under set temperature
    Under your set desired temperature is a small flame, which has never been there before?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #2

    Nov 15, 2015, 11:49 AM
    Are you sure, that usually means heat cycle.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant furnace turns flame off before set temperature is reached. [ 1 Answers ]

I have a Bryant Induced-Combustion Gas Furnace, model 373LAV Downflow & 383HAV Upflow. Mounted horizontally. It turns off flame before set temperature is reached, and recycles immediately. Sequence is: Inducer starts After 25 sec. the ignitor glows After 8 sec. the flame lights After...

AC not keeping up with set temperature [ 4 Answers ]

I know it's really hot (105 today), but my ac is not keeping up with what I set it to during the day. Yesterday I set it to 78 when I left for the day and when I came home at 6pm it was 81 in the house. I set it to 75 and it did't reach that temperature until 11pm. This isn't normal even though...

Problems with the set temperature [ 3 Answers ]

Hi, I need some help please , my ac takes to long to stop when it reaches the set temperature and then 2 minutes later starts again , I live in Florida , it's hot now outside , like 92 , but even with that , it's that normal , and it even happens at night(at 12:00 am) I set it to 76 and when it...

A/C cools below set temperature [ 1 Answers ]

My A/C cools below the set temperature. I turned the Thermostat off and the furnace kept running. I had to turn off the furnace at the breaker. Trying to figure out what might be the problem.


View more questions Search