Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Changed over from White Rodgers Thermostat to Honeywell thermostat
[ 3 Answers ]
I have a White Rodgers 2 stage heat/1 cool model 1F58-58 heat pump thermostat that I have changed over to a Honeywell programmable thermostat model RTH7400. Did all the correct wiring as stated in the books but when set to cool, the heater kicks on instead of the central air conditioning. What...
Mears Thermostat
[ 11 Answers ]
I just replaced a MEARS thermostat for my electric baseboard heat that would only operate in the full on or full off position. In other words "all or nothing". I put in a new MEARS M 612 and wired it the same way the old thermostat was wired. This also agreed with the schematic that came with...
Thermostat turns on furnace and then thermostat shuts back to HOLD
[ 7 Answers ]
I believe that when we re-run the program with the correct date and time, if the temp has to go up, the furnace runs until it gets the appropriate temp, then it turns off and when it does that, the thermostat also turns off going to the HOLD state.:confused:
Mears Electric Heat Thermostats
[ 1 Answers ]
We have moved into another house with electric heat. The thermostats are 220v double break by mears. When turning on the thermostats in each room, none of them indicate the true temperature according to the knob setting. When they click, that is the current temperature in the room. All are... View more questions Search
|