Check out some similar questions!
Carrier Natural Gas Furnace main gas valve will not open every call for heat
[ 1 Answers ]
We have a Carrier Weather Maker 8000 Natural Gas Furnace not functioning properly. We have replaced pressure switch, hot surface ignitor, flame sensor and control board. It will cycle 3 to 4 times and then not come back on. Is it possibly a bad coil on gas valve?:rolleyes:
Gas Fireplace main burner will not light, pilot is fine
[ 2 Answers ]
Hi all. I've got my pilot to light no problem. Then I turn gas knob to "on" as per instructions. I "adjust" switch on thermostat on wall only to hear clicking noise coming from inside panel of fireplace but the main burner doesn't light (like it used to last winter). I believe it's the main...
No gas supply, or faulty valve in gas fireplace?
[ 4 Answers ]
We use a regency Gr55-3 ~20,000btu gas fireplace for heating our bedroom. Its about 10 years old and has given us no trouble before. The gas supply line is a small (3/8"?) flexible copper tube that runs about 40' from a prv. I believe the prv lets pressure down from 2psi to a few inches of...
Hard to open and close main water shut-off valve
[ 1 Answers ]
I and my wife live in a very cold region. Most of the time I am out of town on project work, my wife also may have to leave for 2-3 days leaving our home unoccupied. Here is the problem, people advised us to close the main water shut-off valve before my wife leaves the house to prevent pipe...
Gas valve noise on main valve engagement
[ 1 Answers ]
I have a carrier 58gs100ga furnace with a white rodgers 36e93 gas valve. The main gas valve solenoid chatters or rattles for a split second before it stays engaged after the pilot is proved. I just replace the spark/lock out board and the fan board for a different problem. This chatter is... View more questions Search
Add your answer here.
|