Ask Experts Questions for FREE Help !
Ask
    jammie73's Avatar
    jammie73 Posts: 1, Reputation: 1
    New Member
     
    #1

    Feb 9, 2010, 08:11 AM
    Luxaire troubleshooting
    My outside furnace will come on but no heat its like a valve is stuck. If I give the flow valve a slight tap on the bottom the furnace will light up, but when the thermostat reaches temp and turns off the start up has to be repeate. Sometimes it does fine , but rite now it won't even try to run . When it turns on the flame just flutters on then goes rite back off
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Feb 9, 2010, 08:48 AM
    Try cleaning the flame sensor with fine sandpaper or steel wool..
    Attached Images
      

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Luxaire troubleshooting [ 9 Answers ]

Hello. I am hoping somecan can give some ideas for a fix. I just had a brand new Luxaire 95% + gas furnace installed in my home. Intermitantly I get the 4 red flashes error, the heat turns off and the blower stays on. Sometimes it corrects itself and fires up again while attempting to satisfy the...

Luxaire troubleshooting [ 3 Answers ]

Are luxaire furnice fires up than the gas shuts off and blows cold air,turnit off and on the switch on it might work right sometimes. Ireplaaced the ignighter aand it did not make any diff.

Luxaire troubleshooting [ 0 Answers ]

Our luxaire is a high efficiency model and frequently will shot off before the requested temperature is reached. We just had the "Initiator Motor" (power vent motor) replaced because it seized up. I thought the issue was related but it is not. The problem happens several times/day. If I shut...

Luxaire troubleshooting [ 0 Answers ]

Within the last couple of days, the blower will not shut off. You can hear it shut off momentarily and within a second or two turn on again. I am able to shut the actual heat off using the thermostat, but that does not affect the blower. I can turn the entire unit off using the switch on the side...

Luxaire troubleshooting [ 2 Answers ]

My LuxAire furnace runs intermitently but sometimes just cuts off and doesn't start again, then if I cut off the power and reconnect it the furnace starts for awhile. I am getting a code of seven blinks. It seems to run for awhile but nothing is consisitant? Please!


View more questions Search