 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Lux 1500 thermostat clicks on but isn't blowing out heat
I have a lux 1500 thermostat. When I turn the heat on, I hear it starting up but there isn't any heat coming through the vents. At 1st Filter was flashing on the thermostat so I replaced it. I also replaced the batteries. I t worked well for about 5 minutes then nothing. I turned it off then back on again. It started up and I hear it but the heat still isn't blowing through the vent. I don't know what to do
|
||||
Check out some similar questions!
I have an older analog Lennox thermostat and am replacing with a Lux ATX500 thermostat. The Lennox thermostat connections do not match those on the Lux. The Lennox is a 6 wire connection with terminals: F, V, R, X, Y, M The Lux has terminals: G, Y, W, RH, RC The Lux instructions are very...
I have a RUUD electric heat pump. It was installed in 1994. The unit is set on "heat" and the fan is set on "auto". The auxiliary light comes on on the indoor thermostat but the heat pump continues to blow cold air and the temperature in my home does not warm up. I tried swithching over to...
I have radient heating and a central air system. I currently have my heat set at 68 degrees and just this week the central a/c is blowing air off and on. The compressor is not running so what is going on? Any ideas? :confused:
I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B -
The maple chase thermostat clicks on sometimes for one second and sometimes a couple of minutes and never stays on long enough to cool down the house just started happening and its really hot.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
