:confused: We are freezing to ice cubes here, please someone help us with an answer. We lite the pilot on our Carrier system just as the instructions on the panel say to do, but when we turn it to on nothing happens. The blower blows cool air. The burners are not lighting inside. Last year...

I have a carrier heating unit installed in 2000... it worked fine since then but now... fan will work if we turn it ON by itself... but if we turn on auto heat then heater goes on (blower like sound) but fan doesn't force the air into the house... if we turn off the heat... fan comes on...

My 110.810320000 model dryer's heating coil stopped receiving current the other day. I see no obvious burn marks at any of the circuitry or wiring junctions yet the coil does work (tested outside the dryer), just no current gets to it. Everything else works likes a top, light, motor, dashboard etc....

My electric dryer is not generating any heat. I don't have a volt meter to test the current at the coil. A few of the coils look a little burnt, but the coil is not broken. All other elements of the dryer are working (ie. It is turning, the light is on inside) The vent is not clogged. Any...

We have a carrier gas furnace which is only about 5yrs old. The fan is not turning on the unit outside and it has begun making a loud noise but its working fine as far as heating the house. What could be the problem and would it cost a lot to fix. Thanks for any help.