Ask Experts Questions for FREE Help !
Ask
    serioushorsepow's Avatar
    serioushorsepow Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 2, 2013, 11:41 PM
    Limit switch help. Please!
    I have a payne model PG8UAA42091 natural gas furnace. It keeps flashing code #13 which is for the flame rollout switch/ limit switch. I know where it is at on my furnace I just don't know how to reset it. It is freezing in my home and I would be very grateful to get it working again soon. Any info will help. Thanks in advance.
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Feb 3, 2013, 08:02 PM
    There are usually several limits &/or rollout switches. Some are manual reset via a small push button in the center, some are auto reset but often require turning the furnace off for a few seconds to reset the board. Others are small fuseable links & must be replaced. Most furnaces do not have all three types.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I have a Miller furnace that I have replaced limit switch 626337 and aux switch 62639 [ 0 Answers ]

Blower will not come on when furnace comes up to temp but can turn blower on with switch in fan setting.

Brake/clutch engine start interlock switch (limit switch per Murray) [ 0 Answers ]

I have a 12 yr old,10hp, 30inch cut Murray riding mower which wouldn't start. After eliminating the battery, starter, solenoid and ignition switch as being the problem, I found that the plate that slides backwards to depress the button on the interlock switch is not coming back far enough to...

Have a limit switch problem on my heater, do not know where to look for this switch [ 1 Answers ]

Have a limit switch problem do not know where to look for this switch

Goodman limit switch/pressure switch? [ 2 Answers ]

Hi, I've got a goodman furnace (mod. # GHT070-3) it's about 5 years old. Recently, the heat will only kick on for about 30 seconds then shut off. It's giving me 4 flashes: Open limit switch, then it kicks off. After that it gives me 3 flashes and turns back on (pressure switch). It seems the...

Limit Switch - Pressure Switch [ 0 Answers ]

Hello Folks, This weekend I've been playing with a heating system at my new apartment and I'm trying to figure out what the different componets do. I kind of followed the circuit but still have some missing links... 1-There are some terminals on the furnace's circuit board labeled LIMIT. The...

View more questions Search