Ask Experts Questions for FREE Help !
Ask
    debmul's Avatar
    debmul Posts: 4, Reputation: 1
    New Member
     
    #1

    Jan 30, 2007, 03:32 PM
    Lenox furnace problem
    Have a 13 yr old Lenox furnace not staying lit continually. Lights for about 60 seconds kicks off for 2-3 minutes and back on again. Has a red light flashing. Anyone know what this could mean? Thanks
    NorthernHeat's Avatar
    NorthernHeat Posts: 1,455, Reputation: 132
    Ultra Member
     
    #2

    Jan 30, 2007, 04:01 PM
    Click here then go to gas forced air diagnostic codes. I'm guessing it is a weak flame signal sensed, go to what is a flame sensor, on the same page. Most Lennox flame sensor I have encountered are a bear to access, so good luck.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant furnace problem [ 20 Answers ]

Hi All, I have a 5 y/o 80% eff bryant furnace. The problem I have is that my furnace Doesn't always kick on even when thew thermostat shows the temp under the Temp set. I will sometimes have to go down and turn of the blower switch on the furnace wait a couple seconds and then turn it on again....

Furnace problem [ 2 Answers ]

Furnace operates fine except during cycle it will shut down then come back on to complete cycle. Could this be the blower relay or something else?

Carrier furnace problem [ 5 Answers ]

My carrier furnace would only come on if I shut down the main power then turned it back on. Then after it got up to the proper temperature it would shut off but not come back on. Now it won't come on at all. I just replaced the control board and it is doing the same thing.

Furnace Operating Problem [ 1 Answers ]

My furnace is 5 years old. Will not stay lit. The igniter lights, the gas valve open, stays on for 30 seconds and shuts down and does it over and over. Never staying operational. Please help.

Electric furnace problem [ 1 Answers ]

I have an old coleman electric furnace which is not working properly. The problem is that when the blower will quit when it is supposed to but the heating coils keep heating no matter what I do with the thermostat. I have had to cut the unit off at the breaker to stop the unit from heating. Any...


View more questions Search