Ask Experts Questions for FREE Help !
Ask
    Luke Small's Avatar
    Luke Small Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 15, 2015, 06:44 AM
    Lennox model OH oil burning furnace will not ignite
    Old Lennox oil furnace model # starting with OH. The label is damaged so I can't see the rest of the model #. It has oil just will not ignite. Help
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
     
    #2

    Mar 15, 2015, 10:24 AM
    To start, I would suggest a basic tune up: Replace the nozzle, fuel filter, & pump screen (if applicable), & clean & adjust the electrodes. If that fails to get you heat, post back & we will delve deeper.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Lennox Furnace fan will not remain on long enough to ignite [ 0 Answers ]

I have a Lennox G40XH(X) series furnace and my ignitor never turns on (never burns). The fan comes on momentarily and then shuts itself off. The LED lights are flashing in fast mode which makes me think it's the ignitor... but because the fan shuts off so quickly, I think it may have something to...

Lennox furnace shuts off before reaching temp? Model lennox c33-44c-2f [ 0 Answers ]

Had cold snowy days and furnace will shut off before reaching set temp. The exhaust pipes were in the direct path of the blizzard. I can't see any ice blocking but there is a large chunk that appears to be from one of the pipe.

Lennox furnace won't ignite [ 3 Answers ]

Lennox mod GZ4m3/4-120A-4 Ser 6395M52686 12/95 Board LED shows firing sequence, Gas valve opens, igniter doesn't spark, gas valve closes approx 8 sec. later then retries twice more. The furnace can be ignited with lighter during this sequence and appears to burn normally for approx 8 min....

Lennox G12 Furnace won't ignite [ 1 Answers ]

Hello, I have problems with my Furnace. I currently have a Lennox G12RD2-82-3 from 1980. Last week I replaced the furnace blower but now the furnace won't ignite. These are the conditions: --the pilot is always on -- I have replaced the thermocouple --the thermostat is OK --the blower kicks on...


View more questions Search