Ask Experts Questions for FREE Help !
Ask
    Sarath12's Avatar
    Sarath12 Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 3, 2009, 09:11 PM
    Lennox HP16 and EC10 with Honeywell RTH2310
    I do have a Lennox HP16 with Lennox EC10 heat+AC unit. Wanted to rplace the thermostat with HoneywellRTH 2310. Unable to fifure out what wires should connect to the new thermostat.

    Old thermostat have A, L, R, M, E, X, Vr+V, Y, F
    New thermostat Honeywell RTH2310 have Rh, Rc, W, Y, G

    Could anyone help me to solve this.

    Thanks

Check out some similar questions!

Lennox sentinal ec10 furnace [ 2 Answers ]

I have a wood/electric heat furnace. The blower starts up for a wood fire but will not start with the electric heat kicks on. Why?

Old Lennox thermostat to Honeywell. [ 2 Answers ]

This is same another question but not understanding. I am trying to replace a heat pump thermostat on a fuel master plus 1-1. The heatpump has LP furnace for back up heat. It was a Lennox Thermostat and I am replacing with a Honeywell. On the Lennox I have R, V, VR, F, M, L, A, Y, X. Honeywell is...

Lennox to honeywell thermostat [ 3 Answers ]

Im trying to replace a lennox therostat with a honeywell - the heat is working but the air is NOT When I wired the new thermostat the wire marked with w1 and o from the lennox did not match up - the instructions showed the wires both going to the same place - I hooked up the w1 and taped off the...

Lennox thermostat with Honeywell RTH7400 [ 1 Answers ]

Replaceing Lennox thermostat with Honeywell RTH7400 -------------------------------------------------------------------------------- ------------------------------------IF I CONNECT THE O THEN WHERE WILL THE W1...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.