 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Lennox 80UHG primary/secondary limit switch open
Hello everyone,
First I want to say thanks, I've already solved one problem with this furnace this weekend. I had a burners failed to ignite code so I cleaned the flame sensor but now I get the primary or secondary limit switch open. First lets start with the sequence of events for my natural gas lennox 80UHG: Thermostat calls for heat Combustion air inducer starts up (motor sounds good) Ignitor starts to glow Gas ignites Furnace stays lit for a few min Gas is cut off Diag lights flash code for primary/secondary limit switch open. Now what I have checked the primary limit switch with my multi-meter and it is indeed opening (I think correctly as its getting hot). I have also tried supplying power directly to the blower motor and with the blower motor running the furnace runs fine. My questions is when in the start up is the blower supposed to come on? Is the control board not telling the blower to come on? Or is there some other problem? Thanks in advance for your help. If anyone needs any more information let me know Thanks Brad |
||||
Check out some similar questions!
Recently been having issues with my Goodman GMT070-3B, with it lighting and staying lit. I spent last winter lighting it manually. When it reached the thermostat temperature, it cut off and I'd have to start it manually again. I've recently replaced the flame sensor and ignitor. Everything...
We have a Lennox Conservator G8E Furnace - serial Number 6379e18615 - I have no idea how old it is. Our Gas supplier checked it out and advised that the Fan Limit Control is not working. The heat co,es on and the fan starts then immediately cuts off. Is this a major problem as we are negotiating...
Consolidated furnace about 9 years old. I was informed that my heater isn't working so when I looked at the codes on the furnace I saw the light blinking 4 times which meant air circ.problem so I unplugged the unit and plugged it back in and it fired up. I let the unit circulate about 4 times and...
Where can I find this on my furnace
I have a Lennox complete heat sysem in my house and have had lots of trouble with it initially but has been very good for four years or so... Today I found the drain valve leaking so I drained the unit and replaced the valve and refilled the unit, when I tried to restart the unit I get "limit...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
