My furnace has a red light that blinks twice and then pauses and then blinks twice again
Check out some similar questions!
Carrier furnace error codes [ 7 Answers ]
We have a Carrier 58PAV and the Red LED light is on. Furnace makes a high pitch noise when starting up. We are having trouble understanding the directions provided in the manual to do the component test. Instruction manual says to "To initiate the component test sequence shut OFF the room...
Intertherm furnace e2eb-017hb runs briefly, shuts off, then furnace just clicks [ 3 Answers ]
I have an Intertherm furnace, e2eb-017hb. It comes on briefly, blows warm air, then shuts off, and a clicking sound comes from the coil contacts area. I have tested the t-stat, and also replaced a coil contact, thinking that was the problem. I would appreciate any help on what to do next.
York furnace Johnson controls error codes [ 0 Answers ]
I have a 13 yr old York Diamond 80 gas furnace with a Johnson Contol board. After running for some time the system shuts down and won't come back up. The error code is solid on. If I power cycle the breaker switch the unit comes right back up. Is this error code that the controller is failing? BTW,...
Intertherm gas g4r931100595 furnace codes [ 1 Answers ]
I need the error flash codes for intertherm gas furnace g4r931100595
Need list of error codes for furnace [ 1 Answers ]
Need to find a list of error codes for a trane model YCX 024 F 1 MOAE. Serial # K10163642 I do not have the papers on this model.
View more questions Search
Add your answer here.