Hello, we have a Janitrol Model GUH100 gas furnace. The pilot is on, the jets fire on appropriately but the Blower(fan) does nothing. My fiancé said that initially it sounded like the motor was trying to start up but the fan would not turn and that now it does not make that sound. I have pulled the...

I am trying to replace my old thermostat which is a Janitrol HPT 18-60 which is configured as follows Y-Yellow G-Gree R-Red O-Orange W2- White E-Black C-Blue

My furnace is out and this has happened before... it just needed to be reset. I need help locating the reset button on Janitrol model GMP100-4, serial #9403029893... can anyone help? Where is a reset button usually located on a furnace?

My AC shut off for an unknown reason this morning. I was able to manually push in the contact switch on the AC to verify it worked. From there, I have narrowed it down to my 6 yr old Janitrol furnace. I am showing no blinking LED on the control board and since found out that it means "Gas valve...

Our Motor in or heat pump burnt out just the motor no other damage to boards or anything else installed a new motor and am getting code 4. Blower will not turn on in less than a minute. Have not let it run longer as Im afraid it will get to hot and melt wires. The fan turns on gas ignites burners...