 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Intertherm thermostat
We have an Intertherm Model EZEB012HA. The unit when either on air or heat will come on for about 30 seconds and then go off. Then about 3 minutes later, it will come on and run properly. We replaced the thermostat (not an Intertherm one) but it still does the same thing. What should we try next?
|
||||
Check out some similar questions!
We just moved into a house with electric heating and on the settings for the thermostat it reads 2,4,6,8,10 and so on... What are the degrees they stand for? Thanks, Henry
Looking at the anticipator brass slider indicator, there is a little pointer on it that points to the range of numbers. Do we use this pointer to set the slider to the numbers, or do we use the bottom edge of the slider to set to the number? I know the nominal setting is 0.4, but I'm not sure...
I have a intertherm model no. M1MB 056A BW and have bought a hunter thermostat 44360 the intertherm thermostat has a green,red and white wire coming from the back of it and I am not sure where to put them on the hunter thermostat can anyone help me please ?:confused:
I have a Intertherm gas furnace with air conditioning. I would like to replace the intertherm thermostat with a programmable one. What one would be compatible with this system? Thank You
Need help! I have Intertherm furnace and a\c system model number MGH-100-ABWN-05 while the heat\a\c switch on the furnace is on A\C my thermostat can't control it. I have a electronic thermostat made by ritetemp (model number 8030C). I do have the RC terminal jumpered to the RH (r on the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
