 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Intertherm Furnace Problems
I have a 1972 intertherm furnace... it has a red blower unit on top below is the chamber and in front of the chamber is the firing motor... I know I have to change the air filter but for the life of me I can't find it.. where is it located and is it hard to channge
|
||||
Check out some similar questions!
I have an intertherm MMHA070AAHR-05 FURNACE the blower kicks in cycles does not light then shuts down. Any answers
I have a model E2EB-012HA. I replaced both sequencers, transformers, fan relay, and thermostat, and it still will not run. You can touch red and white wire and sometimes it will come on directly. Any answers??
My intertherm furnace id tripping the breaker, any sugguestions?
I have an Intertherm furnace, e2eb-017hb. It comes on briefly, blows warm air, then shuts off, and a clicking sound comes from the coil contacts area. I have tested the t-stat, and also replaced a coil contact, thinking that was the problem. I would appreciate any help on what to do next.
We have an intertherm furnace. The led light is blinking twice meaning that the pressure switch is open. We have replaced the pressure switch and are able to blow air through the attached tubes. They seem clear. The light continues to keep blinking.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
