Ask Experts Questions for FREE Help !
Ask
    themab's Avatar
    themab Posts: 3, Reputation: 1
    New Member
     
    #1

    Jan 12, 2010, 07:57 PM
    Installng t-stat
    Hi,want to know witch wire digram I go by, on the digram,it have,nomal two stage system , heat pump w/o auiliary heat , heat pump with auxiliary heat,witch digram I go by, I have a goodman 4 ton unit with heat strip,and I'm installng a ritetemp manual t-stat
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Jan 12, 2010, 08:05 PM
    Heat pump with auxiliary heat
    themab's Avatar
    themab Posts: 3, Reputation: 1
    New Member
     
    #3

    Jan 12, 2010, 08:24 PM

    OK,I would like to know why my unit don't kick off when it get to the set point,it stop blowing hot air and start blowing luke warm air but it never shuts off,do I have a wire not hook up,what can I try
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #4

    Jan 12, 2010, 08:39 PM
    What? If you wired it as stated above I have no idea why it is not working unless somehow you wired it wrong. Check wiring over from outside to inside to thermostat. Also read the directions for the outside,inside, and the thermostat to see where the problem is. I have no access to your instructions

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Lennox 51M33 stat to Hunter 44860 stat [ 4 Answers ]

Lennox Heat Pump with Electric heat backup Lennox 51M33 wiring O - orange R - red G - green Y1 - yellow W1 / E jumper - white L - light red (pink) C - black T (Outdoor temp sensor) - blue

Installng Thermostat [ 4 Answers ]

I'm trying to install a thermostat. But I need some help. I have seven wires for my heat /cool system coming from the wall. The colors are as following: Brown Red Blue Green Orange Yellow White

Replacing honeywell stat to an other honeywell stat [ 19 Answers ]

I'm switching my old stat to a new one that lets me enter a program. I have an electric central air furnace and a thermopump outside that provides heat and AC. I'm going from a honeywell CT3600 or so (looks the same as in the manual for that one but without the program buttons) to a RTH8500....

18-3 t stat [ 1 Answers ]

I have 18-3 coming out of the wall the problem is I have a new digital thermostat with no directions and I did not remove the old t-stat how do I find out what wire is what I live in a apartment with base board heat

Just 3 wire T-Stat connection, new stat, diff letters [ 6 Answers ]

Hi all, I've done tons of reading and can't find my specific wiring, tstat combo to figure it out... hopefully someone can shed some light on it for me. Natural gas forced air furnace, no air conditioning. Had a honeywell for the last 9 years, easy install, labelled easy. (but its dead) Wire...


View more questions Search