Ask Experts Questions for FREE Help !
Ask
    DarrenT's Avatar
    DarrenT Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Mar 15, 2012, 04:56 PM
    Installing programmable Hunter thermostat
    I recently installed a Hunter programmable thermostat. My original thermostat was a nonprogrammable SimpleComfort 2201 thermostat. I have a heat pump.

    Connecting the wires was pretty straight forward except for the white and black wires.


    On my original thermostat, the white wire connected to terminal W2 and the black wire connected to terminal E.

    The instructions for my new thermostat has a conversion table. W2, E, X, AUX equals E on the new system. So according to the table, I could connect either or both the white wire and the black wire to terminal E. I did not think this made sense, so I only connected the white wire to terminal E and did not connect the black wire to anything.

    Is it okay to leave a wire not connected to anything?

    So far the system works with the auto cooling feature and the auto heat feature. I have not tested the other features yet.

Check out some similar questions!

Installing a Hunter Programmable thermostat [ 20 Answers ]

I need some help! I am replacing a Honeywell TH5220D series thermostat with a programmable Hunter 44860. When I matched up the current wire scheme, everything seemed to work except for the air conditioner. When the thermostat showed the A/C on, it was actually just the fan running and blowing...

Hunter Programmable Thermostat ? [ 2 Answers ]

My thermostat keeps flashing RE CO, but I cannot find the manual to figure out what it means. Any idea?

Wiring a hunter 44110 5-2 programmable thermostat [ 1 Answers ]

Am trying to install a new programmable thermostat and I am having problems. My old thermostat had the following wires: white, orange, red, green yellow and blue. The new Hunter thermostat has places for RH, RC, G, Y and W. I have tried several different configurations and cannot get the a/c to...

Hunter 44110 Programmable Thermostat Wiring HELP! [ 3 Answers ]

My current thermostat has the following six wires, hooked as follows: Orange to O Green to G Yellow to Y1 Red to R Black to C White to W1 I am attempting to install the Hunter Programmable thermostat, which only gives me 5 placements for wires:

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.