Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Goodman GMP100-3 Furnace won't Stay On.
[ 14 Answers ]
Hello, I have a Goodman Furnace (model # GMP100-3). The furnace will not stay running. Here is the sequence of events for two different scenarios that are occurring. Scenario 1 1. Thermostat Calls for Heat 2. Inducer starts 3. Pressure switch closes 4. Heating element glows 5. Burners...
I am installing the ICM 280 circuitboard on my Goodman Furnace.
[ 1 Answers ]
I bought the replacement circuitboard ICM280 for my Goodman GMPN 060 furnace. The instructions only address the wires that are included in the upgraded wiring harness. 1. Do I replace all wires removed from the original board? The replacement wiring kit replaces all the thermostat wires, but the...
Goodman GMP100-4
[ 1 Answers ]
The light is continuously blinking and trying to figure out source of problem or what I need to replace. AAA appliance came over it was coming on for a few seconds and now it's not working at all any suggestions what they might have done.
Goodman GMP100-3
[ 1 Answers ]
Hi, Have a Goodman GMP100-3 that's acting strangely. Here's the scenario: - Thermostat calls for heat - Inducer starts - Vacuum switch pulls in - Furnace fires - Furnace comes up to heat and blower starts - Ignition cuts out as blower starts
Wiring inline duct fan to furnace fan goodman gmp100-4
[ 2 Answers ]
How do I wire my inline duct fan to my Goodman model gmp100-4 gas furnace fan so that the inline duct fan comes on and off when the furnace fan does? I understand that I need a relay from the inline duct fan but don't know where to connect the relay to the furnace. View more questions Search
|