Ask Experts Questions for FREE Help !
Ask
    Rock hands's Avatar
    Rock hands Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 31, 2011, 07:05 PM
    Installing compressor board - cst1858 - help?
    I've got a Trane XL1600 package unit and one of the relays is sticking on the compressor board. If I tap it with a screwdriver, cold air... Until the unit cycles off.

    I bought the board, now I just want to make sure I install it correctly. I'll shut off the breaker, of course, but do I need to do any thing with the caps? I don't feel like getting shocked.

    Then I'll transfer the wires off the old board to the new, making sure the labels match. Power up and chill out.

    Am I on track here? Thanks!

Check out some similar questions!

Installing mac os in all mother board [ 4 Answers ]

I want to know which mother board support mac os.

Installing ac compressor 96 Avalon [ 1 Answers ]

There is no oil in the new compressor, I am wondering if this should be added prior to installation. Also can the car be driven if the ac is not used. I cannot do the ac system evacuate and re-charge myself. Do the condensors need to be replaced as well?

R410 installing in R22 compressor. [ 2 Answers ]

I'm doing my science project in my college about air conditioner. My project is on eco friendly air conditioner. Is R410 can be installed in a R22 compressor or R12 compressor. I'm asking this because the refrigerant R410 is available in india but the compressor is not available. Help me, is there...

Installing fiberglass duct board? [ 2 Answers ]

I have about 36" of metal air duct missing in my basement. There's metal air duct coming from the supply then a missing section, then a 45 degree elbow and a metal run going up to a room. I have a few questions about replacing it. 1.) Can I use fiberglass duct board to replace it? Is it OK to...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.