 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Installed RTH2300 and its not working correctly
I just bought a Honeywell RTH2300 to replace an older thermostat in my house. I have an oil furnace and two zones. One zone is working correctly, but the other is not. The zone that IS NOT working correctly has a White (W), Red (R), and Blue (C) wire coming out of the wall. I have the White wire going to white on the RTH2300, the Red going to red, and the blue (C) taped off and not going to anything. The zone that IS working correctly has the W, R, G, Y, and Blue (C) wires coming out of the wall, and I taped off the Blue wire and had the others go to their respective colors. Can anyone help with the zone that is not working correctly?
|
||||
Check out some similar questions!
Honeywell RTH2300 installed - heat works in 'on' setting; does not work in ' auto' setting?" JP1 heating fan control set to "HE" position (electric furnace). JP2 heat pump reverse valve set to "O" position (orange wire attached). (Installed about 6 months ago. worked fine in summer for...
I turn my Moen single handle faucet to "C" and get HOT water. I try turning it to "H", but the handle will not turn that far. How can I fix this? Did the builder install it wrong? I am stuck with HOT water and no cold water, even if handle is turned on "Cold" side! Help Please!
Hi there. Hope somebody can help me out. I have had a quick look around on the net but it all seems very complicated for what I thought would be a very simple job... I have today installed Amazone BT Truetype font. It shows in my fonts folder in the control panel , and I can use it in...
Purchased a house and the 4 way not working. Figured that someone miswired one of the switches and when I checked the boxes this is what I found. Box 1 at bottom of stairs has 14-3 and 12 -2 BX cable. Power into this box. What is confusing in this box is that someone attached a bare copper wire...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
