Hi; I have a goodman furnace model GMP075-3 and I have no power going to my hot surface ignitor power vent satrts up and I hear the control board click and my voltmeter shows 0.05 and jumps to 0.06 and back to 0.05 when it clicks. I hear the gas valve open and then shut when no flame after...

Our basement unit York Diamond 80 runs and run with the ignitor working and the blower running but does not heat up the first floor. The unit in the attic heats the first floor fine. The exhaust vent seems to be extremely hot. Is it possible the motor that exhausts the cabon monoxide from the gas...

I posted a question before about how my ignitor kept going out. Well after replacing the ignitor again last night and the furnace not working again this morning, we tested one of the old ignitors. I guess it hasn't been the ignitor after all because when one of the old ones was plugged into 120...

I have a room with no power, nothing works, circuit breaker is on, I test with my wiggy and get nothing but when I plug in my outlet tester the two lights come on saying the outlet is OK. This really has me stumped. Can someone help? ...