Ask Experts Questions for FREE Help !
Ask
    charlie6969's Avatar
    charlie6969 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 11, 2012, 12:38 PM
    If I have a red and white colors on a thermostat wire where do they go
    I have a new thermostat and I only have a red and white colored wires and on my new thermostat I have rc,rh,g,w,y,b,o I don't know what colors go where
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
     
    #2

    Jun 11, 2012, 03:57 PM
    Red to rh, and white to w. This will get you up and running. If you have a jumper between rh and rc, just leave it in, and if there is no jumper, this will be fine too.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Thermostat Wire Colors? [ 3 Answers ]

I have an old style honeywell It has three wire slots but my old one has four wires. It was ripped of the wall so I'm not sure what wire went where.There are light green,blue,white and red,the blue,red are connected at the furnace as well as the white and green. Where and what colors do I connect...

Black wire red wire and white wire spliced to 10/3 on a 220 circuit [ 25 Answers ]

I have installed a disconnect between my dryer receptable and a tanning bed. I want to splice the 10/3 box wire to the existing 220 wiring at the dryer. Dryer= red, black, white and bare ground wires 10/3 wire= black, white, and bare ground How do I splice these to allow the disconnect box to...

Why did juan choose the colors red and white for his crosses in 1680 [ 1 Answers ]

Why did juan choose the colors red and white for his crosses in 1680

Correct wire colors on a new thermostat [ 1 Answers ]

I am installing a Honeywell thermostat, model RTH221. There are three wires coming from the furnace, Red, White, Blue. The terminal labels in the old Sears thermostat, model 38792010, look like they are marked: SW - White wire TM - Blue wire TM-TR - Red wire. How do I match these to the new...

Thermostat wire colors [ 3 Answers ]

I just removed my old mechanical thermostat. The wire colors were: W = white G = green R = ref Y = yellow O = Orange The rth230b has: W, Y, Rc, Rh, and G. I initially installed the Red in Rc, Y, W, and G. I did nothing with the O wire. When I turned the system on the thermostat started...


View more questions Search