I have a carrier model 58gs100-2. The tstat works and the pilot light when tstat is turned to heat, but nothing else happens, no other flames and no blower!! Please help!!
Add your answer here.
Check out some similar questions!
Carrier Gas Furnace blower runs on/heat won't come on [ 3 Answers ]
I have a carrier gas furnace model 58DP100 . The fan runs continuously and the gas burners will not ignite ( the pilot is lit ) HELP... please .
Carrier model 58GS100-GB furnace will not ignite [ 1 Answers ]
Ignition lockout module ----can not find part
Carrier Hvac heat pump with aux/em heat- NO AUX HEAT [ 1 Answers ]
I have tried to install Honeywell 7500d thermostat. I get heat pump heat but no emergency heat although the termostate is calling for it. The installation manual says to see authorized agent if I have a dual 0/b on existing thermostat and another wire is attached to common. As of now, I have ...
Carrier 58GS100-2 201BB [ 1 Answers ]
The blower motor (which is brand new 1/2hp) will not start unless I turn it by hand. It appears to be the capacitor, but I have no idea what the capacitor looks like or where it is located. Can anyone help please. Much thanks
No heat, blower runs constantly, carrier gas furnace [ 7 Answers ]
This am we I got up the blower on my carrier series 100 gas furnace (approx 10 years old)was running and blowing out cold air. Even with the thermostat turned to off the blower runs constantly. The only way to stop the blower from running is to turn the switch on the side of the furnace to off or...
View more questions Search