I believe I have troubleshot this down to either the blower motor or their Integrated Controller board. 120VAC to motor OK but too many other wires from board to motor for motor control to test (variable speed) without advice or a manual. Motor is rated for 100% duty cycle and has only been run...

Please help I have a 96' comfortmaker and I cannot get to the motor to change it how do I do it?

I have a 2 year old Goodman, gas, no heat pump. There is a flashing LED that blinks once ever 4 seconds. Also, blower motor does not stay on always. We did smell something like an electrical burn. I'm guess my blower motor is fried?

THere is no air blowing when the heat is on. The furnace does come on but no air blows. If I turn the heat off and manually turn the fan on the air blows. If I leave the fan switch in the on position and turn the heat on the air stops.

I have read multiple posts about wiring for blower motors and saw one that almost answered my question. I have an old blower motor that I would like to convert to a shop air filter. I know that it is a multi-speed motor. It has 8 wire connections and are labeled as such: Power cap cap ...