How to replace old bryant thermostat to rth6350d

hancho Posts: 1, Reputation: 1

New Member

Jun 1, 2012, 03:04 PM

How to replace old bryant thermostat to rth6350d

The old Bryant heat pump thermostat had 8 wires connected with no jumpers: G terminal(green wire), Y(yellow), E(brown), O(orange), W1(white), C(black), R(red), W2(blue).
The new Honeywell RTH6350D

Check out some similar questions!

Trying to replace a bryant heat pump thermostat with a Honeywell rth3100c [ 3 Answers ]

Trying to replace a Bryant heat pump thermostat with 8 wires connected with a Honeywell RTH3100C. Instruction guide says if W1, W2, and Y were connected, contact a HVAC tech. Honeywell customer service was no help. Any ideas?

I am trying to replace a lennox thermostat 67k4801 to a honeywell thermostat rth6350d [ 1 Answers ]

Wires don't match

How do I wire a Honeywell RTH6350D thermostat to my Bryant fb4anf024 heat pump? [ 0 Answers ]

This is the second thermostat I'm installing, which is sort of the heart of the problem. I installed the first one (a Rite Temp) about 18 months ago with a lot less trouble. Of course, I removed an older thermostat, so I was able to label the wires properly, etc. But suddenly the display on the...

RTH6350D I am repalcing a TA 2000 thermostat with a Honeywell RTH6350D. [ 2 Answers ]

The TA 2000 has W2, O, X, R, Y, G, and E. The RTH6350D has O/B, R, Y, G, E, Aux, and Rc. Which wires go where? (I'm assuming that the wires that have similar terminals on both models are just moved across. But the W2, Aux and Rc don't have an equavalent.

I want to replace my Bryant P271-3457 with a LUX TX9000TS thermostat. [ 0 Answers ]

Current configured Bryant P271-3457 heat pump thermostat is 7 wires labelled as follows, Y, G, R, O, W2 (B handwritten over the W2), E and C. The LUX thermostat has the following options: W, Y, G, B, O, RC, RH and C. I can create jumpers if necessary but just don't want to damage my...

View more questions Search

Check out some similar questions!

Add your answer here.