Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Can I Use Galvanized Metal Conduit as the ground for a sub panel in same building?
[ 5 Answers ]
I have an old 60 AMP circuit to a stove/oven receptacle. The home run from the main panel to the stove receptacle is in a 3/4" Galvanized Metal Conduit pipe containing 2, #6 and 1, #4 wires and NO GROUND wire. The new stove/oven requires only a 40 Amp breaker (not sure of the potential maximum Amp...
Metal electric line poles. Why are they not painted or galvanized?
[ 1 Answers ]
Recently, the poles for a large electricity transmission line were replaced. These are huge, steel poles. But they are not painted or galvanized, and are covered with rust. Why wouldn't they be coated to prevent rust?
Painting Prep - Sanding
[ 2 Answers ]
I recently purchased a home and am in the process of repainting. I've patched all the screw and nail holes in the walls. I want to fully sand the walls before putting on the primer since the current paint job has lots of drip marks and such. Question 1) What grit should I use for the final prep...
Outdoor prep & painting treated lumber
[ 1 Answers ]
Wht is the correct way to prep & paint treated lumbar for an outdoor trellis without peeling and will last through Michigans winters. View more questions Search
|