Ask Experts Questions for FREE Help !
Ask
    pooleparty's Avatar
    pooleparty Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 13, 2009, 08:48 AM
    How much freon should be in my amana heat pump, I think it is 2 ton
    How much freon shoud be in my amana heat pump, I think it is 2 ton
    450donn's Avatar
    450donn Posts: 1,821, Reputation: 239
    Ultra Member
     
    #2

    Jan 13, 2009, 09:24 AM

    Depending on the system it will take what it needs. You really need to fill to the gage pressue's. And unless you are a qualified service technician I do not recommend attempting this as a DIY project
    ronnies_420's Avatar
    ronnies_420 Posts: 6, Reputation: 1
    New Member
     
    #3

    Jan 10, 2010, 09:54 PM

    Amount is on service plate on side. It will show charge in ozs. Divide by 16 you will get the pounds,have serviceman to add gas if needed.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Home A/C heat pump freon amount. [ 4 Answers ]

I have been out of the business for 20 yrs and I didn't keep any of my books on A/C. For a 3 and one half ton central air heat pump (Trane) totally evacuated system about how many pounds of Freon will it take. I am talking pounds by a scale from a 30 lb can of R22. Depending on the outside temp...

AMANA AC/HEAT pump will "not" turn on [ 1 Answers ]

Wall UnitT-A/C-HEAT PUMP, 230V AMANA. Older model 10 years plus+++ Unit will not turn on, no noise, groaning, no fan/compressor, etc or any noise. Have verified wall receptacle does have power! Where do I start to look? Where would most likely problem would be?

Amana Dryer heat quits workint [ 2 Answers ]

My two year Amana dryer quits heating after a few minutes of drying. What is causing this problem?

Amana Gas Dryer won't heat on heat cycle [ 2 Answers ]

I have an Amana gas dryer about 10 years old. The dryer will heat and the timer will advance on the timer cycle but it will not heat on the heat/more heat cycle. I have cleaned the lint vent entirely. I can see the ignitor get red hot and then ignites the gas on the timed setting. I am not sure...

My Brand New Goodman 3tn Heat Pump only pushes freon for 5 seconds and stops. Why ? [ 2 Answers ]

I just installed a brand new 3 ton goodman Heat Pump system... when the ac turns on , I can here the reverse valve open and the compressor kick on , and here is the question.. The 7/8" copper freon line gets ice cold as it should but only for about 10 seconds and then it goes back to a normal but...


View more questions Search