Ask Experts Questions for FREE Help !
Ask
    cervin's Avatar
    cervin Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 28, 2011, 08:47 AM
    How many ton is my tempstar 5000 model ch5530vkd1
    How many ton is my tempstar 5000 model ch5530vkd1
    I am getting ready to add on an additional 300 sq ft and want to know if it can handle the load.
    Tks
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #2

    Apr 29, 2011, 07:26 PM
    Your almost adding a ton of cooling and heat load to your system if not more. I don't over size my systems one ton on instalations for future use. Not knowing the size and load of the system that's in your house I would say you will be under sized by 12000 BTU.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I have a Tempstar 5000 heatpump. [ 2 Answers ]

My heatpump started freezing up last month and I noticed that the fan was hard starting. I replaced the capacitor so the fan would start up, but it still has freeze ups. What could be my problem?

# of Tons for Tempstar 5000 model # CA5530UKA1 [ 1 Answers ]

How many tons is a Tempstar High efficiency 5000 model # CA5530UKA1 I am looking to replace with out replacing the tower inside the house, Just the outside unit?

Tempstar furnace 5000 [ 4 Answers ]

I am looking for a red tube very flexible and high heat resistant which is not available anywhere in my New York (rockland county) area. This tube allows the regulation of the thermostat efficiency.

Tempstar 5000 [ 1 Answers ]

I have a Tempstar 5000 A/C unit and would like to know the condenser size It's model # is ca5536uka1 so should I assume it is a 3 ton unit? Thanks Erik

Tempstar 5000 [ 3 Answers ]

I have changed the coil because it looks like it had a spark or got hot because there was black soot on the power terminals so I replaced it but it still doesn't work. When you turn it on there is a small hum the magnets are not being pulled in, when you push them in humming gets louder from the...

View more questions Search