Ask Experts Questions for FREE Help !
Ask
    Jennifer Miller's Avatar
    Jennifer Miller Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 12, 2009, 02:34 PM
    How many BTU's is my Sears Ten Furnace?
    I have an older Sears Ten furnace, Model #4276451, Manufacture #96709, Serial #H82729917. I need to know how many input BTU's this furnace has.
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Mar 12, 2009, 03:37 PM

    Input btus should be located on same tag as model and serial info. Most likely this tag is inside the furnace on the side or bottom. It may also give BTU output.(which is really the important number to look at)
    dac122's Avatar
    dac122 Posts: 463, Reputation: 17
    Full Member
    		  
    #3

    Mar 13, 2009, 06:00 AM

    I presume you mean BTU output, not input. Actual BTU output may vary depending if you are using NG or propane. Why are you interested?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Older Sears Kennmore gas furnace [ 7 Answers ]

I have an older Sears Kennmore furnace, I'm guessing early 80's. Model # 867.763334 Furnace works great but intermittently does not work. When not working, only when I turn the power off and back on to the furnace will it work. Happens 3 times a week. Any ideas?

Sears Fifteen Horizontal Furnace [ 4 Answers ]

Hello, I have a Sears Fifteen Horizontal furnace that will come on and then go out before the proper temperature is achieved. The fan will continue to run but the burner will not re-light until I reset it at the thermostat. Also, I had the blower motor replaced several years ago and the tech...

Old sears furnace [ 2 Answers ]

I am looking for burners for a Sears Fifteen furnace, model #867.775931 ser # h52844368 mfg# 97391. Can anyone help in locating these items? Thanks~

How many btu's would I need [ 8 Answers ]

How many BTU (A/C unit through the wall ) would I need for 1000 Sq Ft? This would be for the main floor of the house finished attic above and 8 ' ceilings, it would be used to cool a living room and dining room area with a foyer and short hallway the house faces the east which means the unit would...

Old Sears furnace [ 1 Answers ]

We have an older(at least 20 years that we know of) Sears series 600 furnace. Recently the blower started coming on for 10 to 15 seconds than shutting off. After 3 or 4 times of doing this furnace will run through a normal cycle. Also ,sometimes the blower will come on as soon as the burner lights...

View more questions Search