OK I think this was a brainless operation, but I can't get this thing lit? OK so I go to the off position... no brainer there Go to the pilot position and press on the reset red button and hit the ignitor button Nothing, at first I saw the spark, but when I hit it, I see nothing? I...

My gas hot water heater dial has OFF to the left, PILOT in the middle and ON to the right. If we are going away and want to not have the water heated can we just turn the dial to PILOT and the flame will stay lit but just won't heat the water or does the flame go out completely and then PILOT would...

I have a wall heater, the pilot light was out so I re-lit it a couple days ago and it went on.. about 4 hours later I noticed it was out again... same thing off and on for three days... this time I lit the pilot and turned the heater on it immeditly made a click sond and went out completely... it...

My water heater is located in my attic. After Katrina, I had to repair my damaged roof and it seems that the attic fan went out. Since then my water heater pilot light has repeatedly gone out. I can re-light it usually, but the lack of air up in the attic causes the light to go out. Presently,...

I have the same problem as the person who asked about getting their wall heater to light. The answer was to make sure the flame was touching the thermocouple.. . But how do you do that? I can't make the flame higher, so do I move the thermocouple lower and what does a thermocouple look like...