Ask Experts Questions for FREE Help !
Ask
    koczorowski's Avatar
    koczorowski Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 9, 2010, 07:13 AM
    How to fix a pressure switch stuck open
    My furnace will not kick on to heat. I have 3 blinking red lights saying the pressure switch is stuck on open. How do I fix this?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Feb 9, 2010, 07:37 AM
    Test the pressure switch and if really stuck open and will not close replace with the correct pressure switch for your model and brand of unit.
    mliss's Avatar
    mliss Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Oct 16, 2010, 09:20 AM
    My pressure switch light indicating open was on and the furnace would not come on, the problem was abundle of wires above the inducer motor had a couple that were draging on the very delicatle balancing do dah that hangs on the inducer motor. Once they were wire tied out of the way the delicate thing could move free and the furnace works again. The tip off was trying to spin the fan inside the inducer it should spin free this one only would rotate less than a half rotation then return to starting position, M;Liss
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Brass pressure relief valve,stuck open how to fix [ 2 Answers ]

I have a brass pressure vavle located at the top of my well, and when the pump kicks on,I hear air but get no water. How do I fix this or is there another reason I'm not getting water.system is 3yrs old and deep well 370 ft,1 3/4 hp motor

Pressure switch stuck open [ 2 Answers ]

Hi, my name is julie and I have a goodman furnace and the red lights blinks 3 times telling me that my pressure switch is stuck open is there anything I can do? Or do I need to buy a new one

Pressure switch stuck open [ 0 Answers ]

Indicator shows pressure switch stuck open, blew out hoses with light pressure, heard clicking noise, no water present. Blower is working, fan works, furnace still not kicking on.

Pressure switch stuck open [ 4 Answers ]

I have replaced the pressure switch, the blower does not seem to have any power coming to it, help!!

Pressure switch stuck open gibson furnace [ 3 Answers ]

I have a gibson forced hot air furnace and a have a code that is telling me that the pressure switch is open. If I drain the water out of it it will run for a short period.. Do you think I need a new pressure switch or do I have a drainage line clogged. Model number KG6R060C-12a

View more questions Search