 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Compressor not kicking on in my rv ac unit, does this part control that?
Bryant 376C (installed 1990)problem: The heat turned on as scheduled after 20 minutes the blower stopped. The inducer motor kept running (thermostat set temp was not reached, no ignition, no gas valve opening. Here my attempts to locate the problem: I used the self test procedure on the...
My Tempstar SP80 furnace blower will not come on. The fan timer control board clicks then makes a faint almost whistle noise but the blower never comes on. The blower motor checks okay. How can I test the fan timer control board to see if that is it?
How hard is it to replace control board in carrier 58wav upflow? An where to find one?
I have a gmp 075-3 I havea control board icm 280 and b1809913.The 280 everything comes on except the blower motor.the b1809913 everything comes on except the flame and the led blinks 4 times with the other board icm 280 solid led no blower motor go figure that out and there both new.anybody got...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
